初始提交
This commit is contained in:
52
Core/Inc/can.h
Normal file
52
Core/Inc/can.h
Normal file
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file can.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the can.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __CAN_H__
|
||||
#define __CAN_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern CAN_HandleTypeDef hcan2;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_CAN2_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CAN_H__ */
|
||||
|
||||
23
Core/Inc/can2.h
Normal file
23
Core/Inc/can2.h
Normal file
@@ -0,0 +1,23 @@
|
||||
#ifndef __CAN2_H
|
||||
#define __CAN2_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "remote.h"
|
||||
// CAN数据包结构
|
||||
typedef struct {
|
||||
uint8_t data[8];
|
||||
} can_packet_t;
|
||||
|
||||
// 函数声明
|
||||
void rc_can_init(void);
|
||||
void send_rc_data(const rc_info_t *rc);
|
||||
void pack_rc_to_can(const rc_info_t *rc, can_packet_t *packet1, can_packet_t *packet2);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CAN2_H */
|
||||
52
Core/Inc/dma.h
Normal file
52
Core/Inc/dma.h
Normal file
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file dma.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the dma.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __DMA_H__
|
||||
#define __DMA_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* DMA memory to memory transfer handles -------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_DMA_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __DMA_H__ */
|
||||
|
||||
49
Core/Inc/gpio.h
Normal file
49
Core/Inc/gpio.h
Normal file
@@ -0,0 +1,49 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the gpio.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __GPIO_H__
|
||||
#define __GPIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_GPIO_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ GPIO_H__ */
|
||||
|
||||
13
Core/Inc/led.h
Normal file
13
Core/Inc/led.h
Normal file
@@ -0,0 +1,13 @@
|
||||
#ifndef __LED_H
|
||||
#define __LED_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#include "stm32f4xx_hal.h"
|
||||
void LED_ON(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __LED_H */
|
||||
69
Core/Inc/main.h
Normal file
69
Core/Inc/main.h
Normal file
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
74
Core/Inc/remote.h
Normal file
74
Core/Inc/remote.h
Normal file
@@ -0,0 +1,74 @@
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
#define DBUS_MAX_LEN (50)
|
||||
#define DBUS_BUFLEN (18)
|
||||
#define DBUS_HUART huart3
|
||||
typedef __packed struct
|
||||
{
|
||||
int16_t ch0;
|
||||
int16_t ch1;
|
||||
int16_t ch2;
|
||||
int16_t ch3;
|
||||
int16_t roll;
|
||||
uint8_t sw1;
|
||||
uint8_t sw2;
|
||||
} rc_info_t;
|
||||
|
||||
#define rc_Init \
|
||||
{ \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
}
|
||||
void uart_receive_handler(UART_HandleTypeDef *huart);
|
||||
void dbus_uart_init(void);
|
||||
void rc_callback_handler(rc_info_t *rc, uint8_t *buff);
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
495
Core/Inc/stm32f4xx_hal_conf.h
Normal file
495
Core/Inc/stm32f4xx_hal_conf.h
Normal file
@@ -0,0 +1,495 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32f4xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
#define HAL_CAN_MODULE_ENABLED
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_FMPSMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth_legacy.h"
|
||||
#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPSMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpsmbus.h"
|
||||
#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
69
Core/Inc/stm32f4xx_it.h
Normal file
69
Core/Inc/stm32f4xx_it.h
Normal file
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_IT_H
|
||||
#define __STM32F4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void DMA1_Stream1_IRQHandler(void);
|
||||
void USART3_IRQHandler(void);
|
||||
void CAN2_RX0_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_IT_H */
|
||||
52
Core/Inc/usart.h
Normal file
52
Core/Inc/usart.h
Normal file
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usart.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the usart.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USART_H__
|
||||
#define __USART_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern UART_HandleTypeDef huart3;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_USART3_UART_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USART_H__ */
|
||||
|
||||
124
Core/Src/can.c
Normal file
124
Core/Src/can.c
Normal file
@@ -0,0 +1,124 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file can.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the CAN instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "can.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan2;
|
||||
|
||||
/* CAN2 init function */
|
||||
void MX_CAN2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 0 */
|
||||
|
||||
/* USER CODE END CAN2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 1 */
|
||||
|
||||
/* USER CODE END CAN2_Init 1 */
|
||||
hcan2.Instance = CAN2;
|
||||
hcan2.Init.Prescaler = 3;
|
||||
hcan2.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan2.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan2.Init.TimeSeg1 = CAN_BS1_10TQ;
|
||||
hcan2.Init.TimeSeg2 = CAN_BS2_3TQ;
|
||||
hcan2.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan2.Init.AutoBusOff = DISABLE;
|
||||
hcan2.Init.AutoWakeUp = DISABLE;
|
||||
hcan2.Init.AutoRetransmission = DISABLE;
|
||||
hcan2.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan2.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN2_Init 2 */
|
||||
|
||||
/* USER CODE END CAN2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 0 */
|
||||
/* CAN2 clock enable */
|
||||
__HAL_RCC_CAN2_CLK_ENABLE();
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**CAN2 GPIO Configuration
|
||||
PB5 ------> CAN2_RX
|
||||
PB6 ------> CAN2_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* CAN2 interrupt Init */
|
||||
HAL_NVIC_SetPriority(CAN2_RX0_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN2_RX0_IRQn);
|
||||
/* USER CODE BEGIN CAN2_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CAN2_CLK_DISABLE();
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
|
||||
/**CAN2 GPIO Configuration
|
||||
PB5 ------> CAN2_RX
|
||||
PB6 ------> CAN2_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_5|GPIO_PIN_6);
|
||||
|
||||
/* CAN2 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(CAN2_RX0_IRQn);
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
77
Core/Src/can2.c
Normal file
77
Core/Src/can2.c
Normal file
@@ -0,0 +1,77 @@
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "gpio.h"
|
||||
#include "can2.h"
|
||||
// 打包函数
|
||||
void pack_rc_to_can(const rc_info_t *rc, can_packet_t *packet1, can_packet_t *packet2)
|
||||
{
|
||||
// 第一个包：ch0-ch3 (共8字节)
|
||||
packet1->data[0] = (uint8_t)(rc->ch0 & 0xFF);
|
||||
packet1->data[1] = (uint8_t)((rc->ch0 >> 8) & 0xFF);
|
||||
packet1->data[2] = (uint8_t)(rc->ch1 & 0xFF);
|
||||
packet1->data[3] = (uint8_t)((rc->ch1 >> 8) & 0xFF);
|
||||
packet1->data[4] = (uint8_t)(rc->ch2 & 0xFF);
|
||||
packet1->data[5] = (uint8_t)((rc->ch2 >> 8) & 0xFF);
|
||||
packet1->data[6] = (uint8_t)(rc->ch3 & 0xFF);
|
||||
packet1->data[7] = (uint8_t)((rc->ch3 >> 8) & 0xFF);
|
||||
|
||||
// 第二个包：roll + sw1 + sw2 (共4字节)
|
||||
packet2->data[0] = (uint8_t)(rc->roll & 0xFF);
|
||||
packet2->data[1] = (uint8_t)((rc->roll >> 8) & 0xFF);
|
||||
packet2->data[2] = rc->sw1;
|
||||
packet2->data[3] = rc->sw2;
|
||||
|
||||
// 填充剩余字节（可以添加校验、计数器等）
|
||||
static uint8_t counter = 0;
|
||||
packet2->data[4] = counter++; // 帧计数器
|
||||
packet2->data[5] = 0xAA; // 校验标记
|
||||
packet2->data[6] = 0x55;
|
||||
packet2->data[7] = 0x00;
|
||||
}
|
||||
|
||||
// CAN发送函数
|
||||
static uint8_t send_can_frame(uint32_t id, uint8_t *data, uint8_t len)
|
||||
{
|
||||
CAN_TxHeaderTypeDef tx_header;
|
||||
uint32_t tx_mailbox;
|
||||
|
||||
// 配置CAN帧头
|
||||
tx_header.StdId = id;
|
||||
tx_header.ExtId = 0x00;
|
||||
tx_header.IDE = CAN_ID_STD;
|
||||
tx_header.RTR = CAN_RTR_DATA;
|
||||
tx_header.DLC = len;
|
||||
tx_header.TransmitGlobalTime = DISABLE;
|
||||
|
||||
// 发送CAN帧
|
||||
if (HAL_CAN_AddTxMessage(&hcan2, &tx_header, data, &tx_mailbox) == HAL_OK)
|
||||
{
|
||||
return 1; // 发送成功
|
||||
}
|
||||
|
||||
return 0; // 发送失败
|
||||
}
|
||||
|
||||
// 发送遥控器数据
|
||||
void send_rc_data(const rc_info_t *rc)
|
||||
{
|
||||
can_packet_t packet1, packet2;
|
||||
|
||||
// 打包数据
|
||||
pack_rc_to_can(rc, &packet1, &packet2);
|
||||
|
||||
// 发送两个CAN帧
|
||||
if (!send_can_frame(0x100, packet1.data, 8))
|
||||
{
|
||||
// 发送失败处理
|
||||
// 可以重试或记录错误
|
||||
}
|
||||
|
||||
// 延时一下，避免总线拥堵
|
||||
HAL_Delay(1);
|
||||
|
||||
if (!send_can_frame(0x101, packet2.data, 8))
|
||||
{
|
||||
// 发送失败处理
|
||||
}
|
||||
}
|
||||
55
Core/Src/dma.c
Normal file
55
Core/Src/dma.c
Normal file
@@ -0,0 +1,55 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file dma.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of all the requested memory to memory DMA transfers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure DMA */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* Enable DMA controller clock
|
||||
*/
|
||||
void MX_DMA_Init(void)
|
||||
{
|
||||
|
||||
/* DMA controller clock enable */
|
||||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
/* DMA1_Stream1_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream1_IRQn);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
67
Core/Src/gpio.c
Normal file
67
Core/Src/gpio.c
Normal file
@@ -0,0 +1,67 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of all used GPIO pins.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure GPIO */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOH, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PH12 PH11 PH10 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
12
Core/Src/led.c
Normal file
12
Core/Src/led.c
Normal file
@@ -0,0 +1,12 @@
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "dma.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
#include "math.h"
|
||||
void LED_ON()
|
||||
{
|
||||
HAL_GPIO_WritePin(GPIOH, GPIO_PIN_10, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(GPIOH, GPIO_PIN_11, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(GPIOH, GPIO_PIN_12, GPIO_PIN_SET);
|
||||
}
|
||||
216
Core/Src/main.c
Normal file
216
Core/Src/main.c
Normal file
@@ -0,0 +1,216 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#include "can2.h"
|
||||
#include "remote.h"
|
||||
#include "string.h"
|
||||
#include "stdlib.h"
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "dma.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
#include "math.h"
|
||||
#include "led.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
//typedef __packed struct
|
||||
//{
|
||||
// int16_t ch0;
|
||||
// int16_t ch1;
|
||||
// int16_t ch2;
|
||||
// int16_t ch3;
|
||||
// int16_t roll;
|
||||
// uint8_t sw1;
|
||||
// uint8_t sw2;
|
||||
//} rc_info_t;//遥控器数据包
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
extern rc_info_t *rc;
|
||||
extern void send_rc_data_complete(rc_info_t *rc);
|
||||
extern void send_rc_roll_data(rc_info_t *rc);
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
MX_CAN2_Init();
|
||||
MX_USART3_UART_Init();
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
dbus_uart_init();
|
||||
HAL_CAN_Start(&hcan2);
|
||||
LED_ON();
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
send_rc_data_complete(rc);
|
||||
send_rc_roll_data(rc);
|
||||
HAL_Delay(10);
|
||||
/* USER CODE END WHILE */
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 168;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
137
Core/Src/remote.c
Normal file
137
Core/Src/remote.c
Normal file
@@ -0,0 +1,137 @@
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "dma.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
#include "math.h"
|
||||
#include "remote.h"
|
||||
#include "string.h"
|
||||
#include "stdlib.h"
|
||||
|
||||
#define DBUS_MAX_LEN (50)
|
||||
#define DBUS_BUFLEN (18)
|
||||
#define DBUS_HUART huart3
|
||||
|
||||
typedef __packed struct
|
||||
{
|
||||
int16_t ch0;
|
||||
int16_t ch1;
|
||||
int16_t ch2;
|
||||
int16_t ch3;
|
||||
int16_t roll;
|
||||
uint8_t sw1;
|
||||
uint8_t sw2;
|
||||
} rc_info_t;
|
||||
#define rc_Init \
|
||||
{ \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
0, \
|
||||
}
|
||||
|
||||
uint8_t dbus_buf[DBUS_BUFLEN];
|
||||
rc_info_t rc = rc_Init;
|
||||
extern UART_HandleTypeDef huart3;
|
||||
|
||||
static int uart_receive_dma_no_it(UART_HandleTypeDef* huart, uint8_t* pData, uint32_t Size)
|
||||
{
|
||||
uint32_t tmp1 = 0;
|
||||
tmp1 = huart->RxState;
|
||||
|
||||
if (tmp1 == HAL_UART_STATE_READY)
|
||||
{
|
||||
if ((pData == NULL) || (Size == 0))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
huart->pRxBuffPtr = pData;
|
||||
huart->RxXferSize = Size;
|
||||
huart->ErrorCode = HAL_UART_ERROR_NONE;
|
||||
|
||||
HAL_DMA_Start(huart->hdmarx, (uint32_t)&huart->Instance->DR, (uint32_t)pData, Size);
|
||||
|
||||
|
||||
SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
void dbus_uart_init(void)
|
||||
{
|
||||
__HAL_UART_CLEAR_IDLEFLAG(&DBUS_HUART);
|
||||
|
||||
__HAL_UART_ENABLE_IT(&DBUS_HUART, UART_IT_IDLE);
|
||||
|
||||
uart_receive_dma_no_it(&DBUS_HUART, dbus_buf, DBUS_MAX_LEN);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
void rc_callback_handler(rc_info_t *rc, uint8_t *buff)
|
||||
{
|
||||
rc->ch0 = (buff[0] | buff[1] << 8) & 0x07FF;
|
||||
rc->ch0 -= 1024;
|
||||
rc->ch1 = (buff[1] >> 3 | buff[2] << 5) & 0x07FF;
|
||||
rc->ch1 -= 1024;
|
||||
rc->ch2 = (buff[2] >> 6 | buff[3] << 2 | buff[4] << 10) & 0x07FF;
|
||||
rc->ch2 -= 1024;
|
||||
rc->ch3 = (buff[4] >> 1 | buff[5] << 7) & 0x07FF;
|
||||
rc->ch3 -= 1024;
|
||||
rc->roll = (buff[16] | (buff[17] << 8)) & 0x07FF;
|
||||
rc->roll -= 1024;
|
||||
|
||||
rc->sw1 = ((buff[5] >> 4) & 0x000C) >> 2;
|
||||
rc->sw2 = (buff[5] >> 4) & 0x0003;
|
||||
|
||||
if ((abs(rc->ch0) > 660) || \
|
||||
(abs(rc->ch1) > 660) || \
|
||||
(abs(rc->ch2) > 660) || \
|
||||
(abs(rc->ch3) > 660))
|
||||
|
||||
{
|
||||
memset(rc, 0, sizeof(rc_info_t));
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t dma_current_data_counter(DMA_Stream_TypeDef *dma_stream)
|
||||
{
|
||||
return ((uint16_t)(dma_stream->NDTR));
|
||||
}
|
||||
|
||||
static void uart_rx_idle_callback(UART_HandleTypeDef* huart)
|
||||
{
|
||||
__HAL_UART_CLEAR_IDLEFLAG(huart);
|
||||
|
||||
|
||||
if (huart == &DBUS_HUART)
|
||||
{
|
||||
__HAL_DMA_DISABLE(huart->hdmarx);
|
||||
|
||||
if ((DBUS_MAX_LEN - dma_current_data_counter(huart->hdmarx->Instance)) == DBUS_BUFLEN)
|
||||
{
|
||||
rc_callback_handler(&rc, dbus_buf);
|
||||
}
|
||||
__HAL_DMA_SET_COUNTER(huart->hdmarx, DBUS_MAX_LEN);
|
||||
__HAL_DMA_ENABLE(huart->hdmarx);
|
||||
}
|
||||
}
|
||||
void uart_receive_handler(UART_HandleTypeDef *huart)
|
||||
{
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) &&
|
||||
__HAL_UART_GET_IT_SOURCE(huart, UART_IT_IDLE))
|
||||
{
|
||||
uart_rx_idle_callback(huart);
|
||||
}
|
||||
}
|
||||
82
Core/Src/stm32f4xx_hal_msp.c
Normal file
82
Core/Src/stm32f4xx_hal_msp.c
Normal file
@@ -0,0 +1,82 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
250
Core/Src/stm32f4xx_it.c
Normal file
250
Core/Src/stm32f4xx_it.c
Normal file
@@ -0,0 +1,250 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "remote.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern CAN_HandleTypeDef hcan2;
|
||||
extern DMA_HandleTypeDef hdma_usart3_rx;
|
||||
extern UART_HandleTypeDef huart3;
|
||||
extern void uart_receive_handler(UART_HandleTypeDef *huart);
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream1 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream1_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA1_Stream1_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_usart3_rx);
|
||||
/* USER CODE BEGIN DMA1_Stream1_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles USART3 global interrupt.
|
||||
*/
|
||||
void USART3_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_IRQn 0 */
|
||||
uart_receive_handler(&huart3);
|
||||
/* USER CODE END USART3_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart3);
|
||||
/* USER CODE BEGIN USART3_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART3_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN2 RX0 interrupts.
|
||||
*/
|
||||
void CAN2_RX0_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_RX0_IRQn 0 */
|
||||
|
||||
/* USER CODE END CAN2_RX0_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan2);
|
||||
/* USER CODE BEGIN CAN2_RX0_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN2_RX0_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
747
Core/Src/system_stm32f4xx.c
Normal file
747
Core/Src/system_stm32f4xx.c
Normal file
@@ -0,0 +1,747 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
||||
STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
||||
STM32F479xx */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#if !defined(VECT_TAB_OFFSET)
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_OFFSET */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the FPU setting, vector table location and External memory
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp, pllvco, pllp, pllsource, pllm;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x0000007D;
|
||||
#else
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
#endif /* STM32F446xx */
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Connect PAx pins to FMC Alternate function */
|
||||
GPIOA->AFR[0] |= 0xC0000000;
|
||||
GPIOA->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOA->MODER |= 0x00008000;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOA->OSPEEDR |= 0x00008000;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOA->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOA->PUPDR |= 0x00000000;
|
||||
|
||||
/* Connect PCx pins to FMC Alternate function */
|
||||
GPIOC->AFR[0] |= 0x00CC0000;
|
||||
GPIOC->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOC->MODER |= 0x00000A00;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOC->OSPEEDR |= 0x00000A00;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOC->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOC->PUPDR |= 0x00000000;
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
||||
#else
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
#endif /* STM32F446xx */
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x000000F3;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x00044014;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
||||
#else
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
||||
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
142
Core/Src/usart.c
Normal file
142
Core/Src/usart.c
Normal file
@@ -0,0 +1,142 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usart.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usart.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart3;
|
||||
DMA_HandleTypeDef hdma_usart3_rx;
|
||||
|
||||
/* USART3 init function */
|
||||
|
||||
void MX_USART3_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 0 */
|
||||
|
||||
/* USER CODE END USART3_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 1 */
|
||||
|
||||
/* USER CODE END USART3_Init 1 */
|
||||
huart3.Instance = USART3;
|
||||
huart3.Init.BaudRate = 100000;
|
||||
huart3.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart3.Init.StopBits = UART_STOPBITS_1;
|
||||
huart3.Init.Parity = UART_PARITY_NONE;
|
||||
huart3.Init.Mode = UART_MODE_TX_RX;
|
||||
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART3_Init 2 */
|
||||
|
||||
/* USER CODE END USART3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(uartHandle->Instance==USART3)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART3_MspInit 0 */
|
||||
/* USART3 clock enable */
|
||||
__HAL_RCC_USART3_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
/**USART3 GPIO Configuration
|
||||
PC11 ------> USART3_RX
|
||||
PC10 ------> USART3_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USART3 DMA Init */
|
||||
/* USART3_RX Init */
|
||||
hdma_usart3_rx.Instance = DMA1_Stream1;
|
||||
hdma_usart3_rx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart3_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_usart3_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_usart3_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_usart3_rx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart3_rx);
|
||||
|
||||
/* USART3 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
||||
/* USER CODE BEGIN USART3_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART3_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==USART3)
|
||||
{
|
||||
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART3_CLK_DISABLE();
|
||||
|
||||
/**USART3 GPIO Configuration
|
||||
PC11 ------> USART3_RX
|
||||
PC10 ------> USART3_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11|GPIO_PIN_10);
|
||||
|
||||
/* USART3 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
|
||||
/* USART3 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
||||
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART3_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
Reference in New Issue
Block a user