# Copy to .env and fill in. Never commit .env - it holds the WiFi password.

# Required
WIFI_SSID=your-ssid
WIFI_PASS=your-password

# Optional

# Capture resolution: qqvga | qvga | cif | hvga | vga | svga | xga | sxga | uxga
#CAM_RES=vga
# JPEG quality 0-63, lower is better quality
#CAM_QUALITY=12
# Set to 0 if your board inverts VSYNC in hardware.
#CAM_VSYNC_INVERT=1

# Pin the authentication mode instead of trusting the scan: none | wep | wpa |
# wpa2 | wpawpa2 | wpa3 | wpa2wpa3 | wapi. Only needed when the scan cannot see
# the AP (a hidden SSID, for instance) - otherwise the scan reports the real
# mode and this only makes it fail faster.
#WIFI_AUTH=wpa2