# Name,     Type, SubType,  Offset,   Size,     Flags
#
# The app partition offset must be validated against each rebuilt image. The
# module this firmware was first brought up on has a defective byte in its SPI
# flash at 0xFADE7 (bits 5..7
# cannot be programmed). The app image is unchanged by where it is placed, so
# moving the partition moves which image byte lands on that address - and
# because a rebuild can shift the image again, keeping an unchecked offset
# would break on the next build. flash.sh picks the lowest 64 KB-aligned offset
# whose byte at that address the flash can actually store, writes it back here,
# and rebuilds.
#
# If you move to healthy hardware, put `factory` back at 0x10000 and delete
# BAD_FLASH_ADDR from scripts/flash.sh; nothing else depends on this.
# The same module also showed bit 6 read back high at 0x10863; keep factory >=0x20000.
nvs,        data, nvs,      0x9000,   0x6000,
phy_init,   data, phy,      0xf000,   0x1000,
factory,    app,  factory,  0x070000,  0x120000,