更新项目结构，修改自述文件

00-Driver/BSP_USART.c

@@ -0,0 +1,145 @@
+#include "BSP_USART.h"
+#include "usart.h"
+#include "main.h"
+
+extern UART_HandleTypeDef huart1;					//usart.c
+extern DMA_HandleTypeDef hdma_usart1_tx;	//usart.c
+extern UART_HandleTypeDef huart3;					//usart.c
+extern DMA_HandleTypeDef hdma_usart3_rx;  //usart.c
+
+void UART2_TxDma_Init(void)
+{
+    //enable the DMA transfer for the receiver request
+    SET_BIT(huart1.Instance->CR3, USART_CR3_DMAT);
+}
+void UART2_TxDma_Enable(uint8_t *data, uint16_t len)
+{
+    //disable DMA
+    __HAL_DMA_DISABLE(&hdma_usart1_tx);
+    while(hdma_usart1_tx.Instance->CR & DMA_SxCR_EN)
+    {
+        __HAL_DMA_DISABLE(&hdma_usart1_tx);
+    }
+    //clear flag
+    __HAL_DMA_CLEAR_FLAG(&hdma_usart1_tx, DMA_HISR_TCIF7);
+    __HAL_DMA_CLEAR_FLAG(&hdma_usart1_tx, DMA_HISR_HTIF7);
+    //set data address
+    hdma_usart1_tx.Instance->M0AR = (uint32_t)(data);
+    //set data length
+    hdma_usart1_tx.Instance->NDTR = len;
+    //enable DMA
+    __HAL_DMA_ENABLE(&hdma_usart1_tx);
+}
+
+void UART2_SendByte(uint8_t Byte)
+{
+		HAL_UART_Transmit(&huart1, &Byte, 1, 0xFFFF);
+}
+
+void UART2_SendArray(uint8_t *Array,uint16_t Length)
+{
+	for(uint16_t i=0;i<Length;i++)
+		UART2_SendByte(Array[i]);
+}
+
+void UART2_SendString(char *String)
+{
+	for(uint8_t i=0;String[i]!='\0';i++)
+		UART2_SendByte(String[i]);//依次发送字符串的每一位
+}
+
+void UART2_SendNumber(uint32_t Number,uint8_t Length)
+{
+	for(uint8_t i=0;i<Length;i++)
+		UART2_SendByte(Number/USART_Pow(10,Length-i-1)%10+'0');//以文本形式发送数字每一位
+}
+
+void UART2_SendNumber_Sign(int32_t Number, uint8_t Length)
+{
+    // 处理负数
+    if (Number < 0) {
+        UART2_SendByte('-');
+        Number = -Number;  // 转为正数（注意：INT32_MIN 有边界问题，见下方说明）
+    }
+
+    // 发送每一位数字
+    for (uint8_t i = 0; i < Length; i++) {
+        // 计算当前位的除数（10^(Length - i - 1)）
+        uint32_t divisor = 1;
+        for (uint8_t j = 0; j < Length - i - 1; j++) {
+            divisor *= 10;
+        }
+        uint8_t digit = (Number / divisor) % 10;
+        UART2_SendByte(digit + '0');
+    }
+}
+
+void UART2_SendFloat_Sign(float value, uint8_t decimal_places)
+{
+    char buffer[32]; // 足够容纳 -123456.789\0
+
+    // 安全格式化：防止缓冲区溢出
+    int len = snprintf(buffer, sizeof(buffer), "%.*f", decimal_places, value);
+    
+    // 防止 snprintf 出错（返回负数或超长）
+    if (len < 0 || len >= (int)sizeof(buffer)) {
+        UART2_SendString("ERR_FLOAT");
+        return;
+    }
+
+    // 发送字符串
+    for (int i = 0; i < len; i++) {
+        UART2_SendByte(buffer[i]);
+    }
+}
+
+
+uint32_t USART_Pow(uint32_t X, uint32_t Y)
+{
+	uint32_t Result = 1;
+	while(Y--)
+	{
+		Result *= X;
+	}
+	return Result;
+}
+
+
+void DBUS_DMA_Init(uint8_t *rx1_buf, uint8_t *rx2_buf, uint16_t dma_buf_num)
+{
+    //enable the DMA transfer for the receiver request
+    SET_BIT(huart3.Instance->CR3, USART_CR3_DMAR);
+
+    //enalbe idle interrupt
+    __HAL_UART_ENABLE_IT(&huart3, UART_IT_IDLE);
+
+    //disable DMA
+    __HAL_DMA_DISABLE(&hdma_usart3_rx);
+    while(hdma_usart3_rx.Instance->CR & DMA_SxCR_EN)
+    {
+        __HAL_DMA_DISABLE(&hdma_usart3_rx);
+    }
+
+    hdma_usart3_rx.Instance->PAR = (uint32_t) & (USART3->DR);
+    //memory buffer 1
+    hdma_usart3_rx.Instance->M0AR = (uint32_t)(rx1_buf);
+    //memory buffer 2
+    hdma_usart3_rx.Instance->M1AR = (uint32_t)(rx2_buf);
+    //data length
+    hdma_usart3_rx.Instance->NDTR = dma_buf_num;
+    //enable double memory buffer
+    SET_BIT(hdma_usart3_rx.Instance->CR, DMA_SxCR_DBM);
+
+    //enable DMA
+    __HAL_DMA_ENABLE(&hdma_usart3_rx);
+
+}
+
+
+
+
+
+
+
+
+