Horldsence
4f893ce140
两块 ESP32-S3-WROOM-1-N16R8 图传板（DVP 接口接 OV2640/OV3660/OV5640）， 向队伍客户端与裁判终端推 UDP 图传。固件是跑在 ESP-IDF 上的 Rust，用官方 esp32-camera 组件采集；客户端是 Rust + Slint 桌面程序。 三个 crate 各自独立构建： . firmware，交叉编译到 Xtensa protocol/ 线路格式与帧重组，两端共用，无 ESP-IDF 依赖，有单元测试 client/ Slint 桌面客户端 视频走 UDP 而非 TCP：实测传感器产出 22 fps，TCP MJPEG 只送出 1.9 fps， 且只占用链路能力的 1%——链路是空的，帧堵在队头阻塞后面等一个实时画面 等不起的重传计时器。改为独立数据报、不重传、缺片丢整帧后达到 20.8 fps。 发现是双向的：板子每 2 秒广播 Hello，客户端广播 Subscribe，板子据此定向 推流。板子身份由 MAC 派生，重启不变，所以客户端可以把绑定存进配置。 裁判端同时收两块板子（每个发送方一个重组器），队伍端绑定其中一块并只显示 自己那一边的血量。装甲板接口已预留（ArmorSource trait + ARMOR_PORT）， 当前无数据源，界面显示占位符。 vendor 了 esp32-camera 2.1.7：组件注册表的版本求解器找不到它，且需要打一处 补丁（见 components/esp32-camera/target/esp32s3/ll_cam.c）。 .gitignore 三条 target/ 都锚定在根目录，因为 protocol/ 与 client/ 各自也是 独立 crate；而 components/esp32-camera/target/ 是上游的按芯片分目录，里面是 源码，必须保留。
55 lines
2.0 KiB
Bash
Executable File
55 lines
2.0 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Finds a FLASH_PAD value that moves the firmware off a defective SPI flash byte.
|
|
#
|
|
# The module this was developed against has one byte at flash address 0xFADE7
|
|
# whose bits 5..7 cannot be programmed, so whatever lands there gets corrupted
|
|
# and the image checksum (and therefore the app) fails to boot. Growing
|
|
# FLASH_PAD shifts .flash.text, which moves a different byte onto that address.
|
|
# A byte is safe when its top three bits are zero, i.e. value <= 0x1F.
|
|
#
|
|
# Usage: scripts/pick-flash-pad.sh [max_attempts]
|
|
# Prints the FLASH_PAD value to use, or exits non-zero if none was found.
|
|
set -euo pipefail
|
|
|
|
cd "$(dirname "$0")/.."
|
|
|
|
# Flash address of the defective cell, and the offset of the app partition.
|
|
readonly BAD_FLASH_ADDR="${BAD_FLASH_ADDR:-0xFADE7}"
|
|
readonly APP_OFFSET="${APP_OFFSET:-0x10000}"
|
|
readonly MAX_ATTEMPTS="${1:-40}"
|
|
|
|
image=$(mktemp -t esp32-app.XXXXXX.bin)
|
|
trap 'rm -f "$image"' EXIT
|
|
|
|
bad_offset=$(python3 -c "print($BAD_FLASH_ADDR - $APP_OFFSET)")
|
|
|
|
echo "bad cell: flash $BAD_FLASH_ADDR (image offset $bad_offset)"
|
|
|
|
for ((pad = 0; pad < MAX_ATTEMPTS; pad++)); do
|
|
FLASH_PAD="$pad" ./scripts/build.sh >/dev/null 2>&1 || {
|
|
echo "build failed for FLASH_PAD=$pad" >&2
|
|
exit 1
|
|
}
|
|
|
|
espflash save-image --chip esp32s3 --format esp-idf \
|
|
target/xtensa-esp32s3-espidf/release/esp32 "$image" >/dev/null 2>&1
|
|
|
|
byte=$(python3 - "$image" "$bad_offset" <<'PY'
|
|
import sys
|
|
data = open(sys.argv[1], "rb").read()
|
|
off = int(sys.argv[2])
|
|
print(data[off] if off < len(data) else -1)
|
|
PY
|
|
)
|
|
|
|
if (( byte >= 0 && (byte & 0xE0) == 0 )); then
|
|
echo "FLASH_PAD=$pad works: byte at $BAD_FLASH_ADDR would be 0x$(printf '%02X' "$byte")"
|
|
echo "set FLASH_PAD to $pad (in src/main.rs, or export it at build time)"
|
|
exit 0
|
|
fi
|
|
|
|
echo " FLASH_PAD=$pad -> 0x$(printf '%02X' "$byte" 2>/dev/null || echo '??') (unsafe)"
|
|
done
|
|
|
|
echo "no safe FLASH_PAD found in 0..$((MAX_ATTEMPTS - 1)); this module's flash is too broken" >&2
|
|
exit 1 |