sloray
cc6b82d7ec
- 固件：新增 link_control / stream_control，覆盖运行中 Wi-Fi 断线恢复、取帧节拍、 温控与质量/帧率减载；UDP 发送增加有界重试预算与帧期限，PSRAM JPEG 直发减少拷贝。 - 协议：重组器严格校验分片布局，统计未收齐、超时与完全缺失的帧，处理帧号回绕与设备重启。 - 桌面端：视频改 latest-value 通道并前置帧时间标记，拒绝积压和慢解码的过期画面；新增 延迟标记页与 --latency-report 校准，完善录制、服务端与退出流程。 - 文档与脚本：新增硬件、开发、延迟、功耗、实时性、稳定性文档和改动记录，重写根 README； 新增构建、性能、延迟与串口长测脚本，以及长测客户端脚本。 - 构建：固定 esp-1.97.0.0 工具链，分区表随构建复制，更新 sdkconfig 与忽略规则。
19 lines
1021 B
CSV
19 lines
1021 B
CSV
# Name, Type, SubType, Offset, Size, Flags
|
|
#
|
|
# The app partition offset must be validated against each rebuilt image. The
|
|
# module this firmware was first brought up on has a defective byte in its SPI
|
|
# flash at 0xFADE7 (bits 5..7
|
|
# cannot be programmed). The app image is unchanged by where it is placed, so
|
|
# moving the partition moves which image byte lands on that address - and
|
|
# because a rebuild can shift the image again, keeping an unchecked offset
|
|
# would break on the next build. flash.sh picks the lowest 64 KB-aligned offset
|
|
# whose byte at that address the flash can actually store, writes it back here,
|
|
# and rebuilds.
|
|
#
|
|
# If you move to healthy hardware, put `factory` back at 0x10000 and delete
|
|
# BAD_FLASH_ADDR from scripts/flash.sh; nothing else depends on this.
|
|
# The same module also showed bit 6 read back high at 0x10863; keep factory >=0x20000.
|
|
nvs, data, nvs, 0x9000, 0x6000,
|
|
phy_init, data, phy, 0xf000, 0x1000,
|
|
factory, app, factory, 0x070000, 0x120000,
|